Each of these sconces has its own rocker switch set into the backplate, which is the detail that makes them practical rather than just decorative: you can turn the light on at the fitting itself, so a pair either side of a bed works without running new switch wiring or reaching for a lamp on the nightstand. The shade is a clean rectangular box in ivory fabric, sitting on a squared L-shaped bracket in an antique brass finish — simple enough for a modern room, warm enough for a traditional one. They take a standard E27 bulb, so the brightness and warmth are yours to set. Supplied as a 2 pack.
Key Features
Pack Size: 2 wall lights included, both in the antique brass finish.
Built-In Switch: A rocker switch on each backplate — operate the light at the fitting, with no separate wall switch needed.
Design: Rectangular ivory fabric shade on a squared antique brass-finish bracket and flat backplate.
Dimensions: 30.5 cm (12 in) tall overall, projecting 16.5 cm (6.5 in) from the wall.
Shade: 18 cm wide, 10 cm deep, 16.5 cm tall.
Backplate: 15 x 15 cm (5.9 x 5.9 in) square.
Bulb Fitting: Standard E27 screw socket — 4 W LED or 40 W incandescent (bulbs not included).
Dimming: Works with a normal wall switch, or a dimmer switch when paired with a dimmable bulb.
Usage Scenarios
Mounting either side of a bed as reading lights, switched individually so one person can read while the other sleeps.
Freeing up nightstand space in a small bedroom or guest room.
Lighting a hallway, landing, or alcove with a warm, contained glow.
Flanking a mirror, fireplace, or artwork for symmetrical wall light.
Before You Buy
The switch is on the fitting itself. If you want them controlled from a doorway instead, they will need wiring to a wall switch in the usual way.
They project 16.5 cm from the wall — worth measuring beside a narrow bed or in a tight corridor.
These are hardwired mains fittings. If you are not competent to wire them, use a qualified electrician.
